Nighthawk RAX43v2 Admin Access Locks Up Issue [Solved]

“After successfully setting up my Nighthawk RAX43v2 router, when I try to log in to the admin console and click on the ADVANCE options, i.e. SETUP or ADMINISTRATION, the interface locks up. At that point, I can no longer use the admin console. In other words, I got stuck with the admin access locks up issue. However, the WiFi router appears to continue to manage connected devices, access to the internet and allows devices to disconnect and reconnect. What can I do to troubleshoot the issue?”

The answer to this question is pretty simple, i.e. reboot the networking device. This fix has helped many users experiencing the same issue in resolving it for good. Chances are that it might help you to perform routerlogin successfully too. Considering this, keep reading.

How to Restart or Reboot Nighthawk RAX43v2 Router?

Although the process of rebooting a networking device is quite easy, still many users lose their minds while putting it to play. Are you one of them? Follow the steps mentioned in this section and gain an understanding of the execution of the process:

1. Locate the POWER Button

The very first step is to locate the power button on the RAX43v2. On some models, it is located on the top whereas on some at the bottom. The word POWER is labeled below the button. This will make it easier for you to locate it.

2. Turn OFF the Power Supply

Once you have located the power button, press it. This will turn off the power being supplied to your networking device. To be certain of the same, see if the power LED light has gone from being solid green to showing no color.

3. Unplug the Nighthawk Router

Next, unplug the Nighthawk RAX43v2 router from the wall socket that it is connected to. Whether your device has an inbuilt adapter or a power cable connected to the wall socket, this step needs to be followed in both cases.

4. Wait for MORE THAN 30 Seconds

Now, wait for some time. To be specific, see to it that you are holding on for more than 30 SECONDS. This one step is required so that your networking device gets enough time to restart or reboot thoroughly.

5. Plug the RAX43v2 Router BACK IN

Once you are done waiting for as much time as needed, plug your Nighthawk router back into its wall socket and press the power button located on it, this time, to turn it on. Soon the power LED light will flash and then become solid green.

After rebooting your device, check if the Nighthawk RAX43v2 router admin access locks up issue is resolved for you. In case you are still not able to log in via 192.168.1.1, then follow the additional solutions mentioned in the following section.

How to Fix Netgear RAX43v2 Admin Access Locks Up Issue?

1. Check the Internet Connection

In case your internet connection keeps dropping, then it is no shocker why the Nighthawk RAX43v2 router admin access locks up issue is not letting you log into your device with ease. Considering this, you need to check the connection between the modem and router. Is it weak or shaky? That is probably because the cable joining them is damaged. Thus, replace the cable connecting them with a new one. That ought to work for you. In case, it does not, then it means that your client device is infected with viruses.

2. Run a Virus Scan on the Laptop

If you have ever lagged in performing online tasks because of viruses, then you already are aware of what we are going to suggest, i.e. get rid of them as soon as possible. However, before that, as a user, you need to be certain whether this possibility is even true or not. By this, we mean that you should run a virus scan on your laptop. In case, the possibility is indeed true, then install antivirus software on your client device without wasting any more time. Our best bet would be MCAFEE. So, do give it a shot.

3. Relocate the Nighthawk Router

Another reason why you are experiencing the Nighthawk RAX43v2 router admin access locks up issue is that the signals coming from your router to the laptop are getting interrupted because of devices emitting radio waves. To eliminate this as one of the causes, relocate your Nighthawk router. Once done, cross your fingers and see if the Nighthawk RAX43v2 router admin access locks up issue has given up following you around and ruining your experience in logging in to the router.

Final Thoughts

This ends the guide discussing the troubleshooting tips through which the Nighthawk RAX43v2 router admin access locks up issue can be resolved with ease. Here is to hope that you will be able to log in to your networking device with ease.