Netgear Router WiFi Not Working But Ethernet Is [Solved]

Netgear routers have played a pivotal role in improving the internet usage experience of users. That is why they can be easily seen routing the modem’s signals in every house. However, it has been observed that some users are experiencing problems while using their WiFi routers. They state that their Netgear router WiFi not working but Ethernet is due to which they can’t access routerlogin.net on their WiFi client devices. Is this statement true in your case too? If yes, then there are chances that your router has been affected by technical glitches. Therefore, you should first of all try your hands on the tried and tested method of power cycling the router.

The power cycling of the WiFi router is all about giving it a rest of 30-40 minutes. All you have to do is power it down and switch it on again after the time frame we’ve just mentioned. You also have the choice of powering down the modem. However, it needs to be switched off and on before the WiFi router.

Has the WiFi utility of your Netgear router started working now? No? In that case, you need to invest some more time troubleshooting the issue. The next section discusses the first stage of the troubleshooting process i.e. it will shed light on the major reasons triggering the issue in the first place.

Netgear Router WiFi Not Working But Ethernet Is [Why]

Here are the most prominent causes behind the problem you are experiencing while using your Netgear wireless router:

Outdated Version of Firmware: Every Netgear WiFi router comes equipped with firmware that does the job of instructing the functions to be carried out via the home network. You must know that this firmware needs to be upgraded timely so that the router can deliver its 100%. But, it seems that you ignored the pending firmware update and hence the issue has arisen.

Presence of WiFi Interference: Another reason why Netgear router WiFi not working but Ethernet is that the router is surrounded by signal interference-creating factors. How can you expect your WiFi router to deliver its signals in all the dimensions if they are getting interrupted by some external factors? Apart from this, if your router lies in a corner, then its WiFi might deny working.

Your Netgear router’s WiFi option might fail to work for you if you’ve disabled it via the web-based management utility. Thus, before you decide to follow the hacks mentioned ahead, confirm that your router’s WiFi option is enabled and it is broadcasting its SSID. If your router has a WiFi button, consider pressing it to enable WiFi.

Netgear Router WiFi Not Working But Ethernet Is [Fix]

Here are the tips to follow if your router’s WiFi is not working but the LAN connection is. But, before that, confirm that your router is getting a non-fluctuating power supply and your client device is present within the range of the signals emitted by the router:

Install the Latest Firmware: Access the Netgear router Status page via routerlogin.net or IP address and log in to your WiFi device. Locate the Firmware Update option under the Management utility and click it. After that, select Check Now and see to it if you get notified about a new firmware version. If yes, then follow the on-screen instructions.

Since the WiFi of your Netgear router is not working, you need to connect your computer to the router directly via an Ethernet cable to carry out the firmware update process.

Change the Router’s Location: To eliminate signal interference, you either need to relocate your router or the factors causing interference. As it is not possible to relocate heavy electrical appliances that are major sources of signal interference, you can go with the first option. While doing so, make sure that you do not make your router sit near a heavy electrical appliance, metal object, or a reflexive surface.

As a Final Observation

From the above discussion, it is very clear that the “Netgear router WiFi not working but Ethernet is” problem can arise due to network errors that can be easily gotten rid of by rebooting. However, you need to proceed with a firmware update via 192.168.10.1 or routerlogin URL if you fail to resolve the issue. Relocation of the router is another tip that can help you fix the problem.

But, if every effort made by you is of no avail, you should reset your WiFi router to the default factory settings and set it up again so that its WiFi can be brought back to work.